Construction of a highly efficient adsorbent for one-step purification of recombinant proteins: Functionalized cellulose-based monolith fabricated via phase separation method.

Currently, purification step in the recombinant protein manufacture is still a great challenge and its cost far outweighs those of the upstream process. In this study, a functionalized cellulose-based monolith was constructed as an efficient affinity adsorbent for one-step purification of recombinant proteins. Firstly, the fundamental cellulose monolith (CE monolith) was fabricated based on thermally induced phase separation, followed by being modified with nitrilotriacetic acid anhydride through esterification to give NCE monolith. After chelating with Ni2+, the affinity adsorbent NCE-Ni2+ monolith was obtained, which was demonstrated to possess a hierarchically porous morphology with a relatively high surface area, porosity and compressive strength. The adsorption behavior of NCE-Ni2+ monolith towards ß2-microglobulin with 6 N-terminus His-tag (His-ß2M) was evaluated through batch and fixed-bed column experiments. The results revealed that NCE-Ni2+ monolith exhibited a relatively fast His-ß2M adsorption rate with a maximum adsorption capacity of 329.2 mg/g. The fixed-bed column adsorption implied that NCE-Ni2+ monolith showed high efficiency for His-ß2M adsorption. Finally, NCE-Ni2+ monolith was demonstrated to have an excellent His-ß2M purification ability from E. coli lysate with exceptional reusability. Therefore, the resultant NCE-Ni2+ monolith had large potential to be used as an efficient adsorbent for recombinant protein purification in practical applications.

Analysis of acupoint massage combined with touch on relieving anxiety and pain in patients with oral implant surgery.

BACKGROUND: Oral implant surgery is an effective procedure for artificial implants in missing tooth areas under local anesthesia. Because patients under local anesthesia are conscious during this procedure, compared with general anesthesia-related operations, they are more likely to experience negative emotions, such as anxiety and tension. These emotional reactions result in shivering and chills in the limbs, leading to poor doctor-patient cooperation and even avoidance of treatment. In traditional Chinese medicine, it is believed that acupoint massage regulates blood and Qi, dredge menstruation, and relieve pain, which is beneficial for patients' emotional adjustment; however, there are few related clinical studies. AIM: To observe the changes in anxiety and pain in patients with oral implant after acupoint massage combined with touch therapy. METHODS: One hundred patients undergoing oral implantation in our hospital between May 2020 and May 2023 were randomly divided into control and study groups, according to a random number table, with 50 patients in each group. The control group received routine intervention, and the study group received acupoint massage combined with touch on the basis of the control group. Anxiety [assessed using the Modified Dental Anxiety Scale (MDAS)], pain severity, blood pressure, heart rate, and satisfaction were compared between the two groups. RESULTS: Before intervention, the difference in MDAS score between the two groups was not significant (P > 0.05), while after the intervention, the MDAS scores decreased in both groups compared with those before the intervention (P < 0.05); the MDAS score of the study group was lower than that of the control group, with a statistically significant difference (P < 0.05). The degree of pain in the intervention group was significantly lower than that in the control group (P < 0.05). Before the intervention, there were no significant differences in systolic and diastolic blood pressures or heart rate between the two groups (P > 0.05). The systolic and diastolic blood pressures and heart rate in the intervention group, during and after the intervention, were significantly lower than those in the control group (P < 0.05). The total degree of satisfaction in the study group was significantly higher than that in the control group (P < 0.05). CONCLUSION: Acupoint massage combined with touch better relieves anxiety and pain in patients undergoing dental implant surgery, improving the perioperative comfort of these patients and ensuring safety and a smooth operation.

Identification and characterization of a novel antifungal compound tubeimoside I targeting cell wall.

Due to fungal diseases that threaten immunocompromised patients, along with the limited availability of antifungal agents, there is an urgent need for new antifungal compounds to treat fungal infections. Here, we aimed to identify potential antifungal drugs from natural products using the fission yeast Schizosaccharomyces pombe as a model organism since it shares many features with some pathogenic fungi. Here, we identified tubeimoside I (TBMS1), an extract from Chinese herbal medicine, that showed strong antifungal activity against S. pombe. To gain insight into the underlying mechanism, we performed transcriptomics analyses of S. pombe cells exposed to TBMS1. A significant proportion of the differential expressed genes were involved in cell wall organization or biogenesis. Additionally, TBMS1 treatment of S. pombe cells resulted in pleiotropic phenotypes, including increased sensitivity to ß-glucanase, enhanced calcineurin activity, translocation of GFP-Prz1 to the nucleus, as well as enhanced dephosphorylation of Prz1, suggesting that TBMS1 disrupted cell wall integrity of S. pombe cells. Notably, calcofluor staining showed that abnormal deposits of cell wall materials were observed in the septum and cell wall of the TBMS1-treated cells, which were further corroborated by electron microscopy analysis. We also found that oxidative stress might be involved in the antifungal action of TBMS1. Moreover, we confirmed the antifungal activities of TBMS1 against several clinical isolates of pathogenic fungi. Collectively, our findings suggest that TBMS1, a novel antifungal compound, exerts its antifungal activity by targeting cell walls, which may pave the way for the development of a new class of antifungals. IMPORTANCE: Fungal infections pose a serious threat to public health and have become an emerging crisis worldwide. The development of new antifungal agents is urgently needed. Here, we identified compound tubeimoside I (TBMS1) for the first time showing strong antifungal activity, and explored the underlying mechanisms of its antifungal action by using the model yeast Schizosaccharomyces pombe. Notably, we presented multiple evidence that TBMS1 exerts its antifungal activity through targeting fungal cell walls. Moreover, we verified the antifungal activities of TBMS1 against several pathogenic fungi. Our work indicated that TBMS1 may serve as a novel antifungal candidate, which provides an important foundation for designing and developing new cell wall-targeting agents for combating life-threatening fungal infections.

Newly designed plate for the treatment of posterolateral tibial plateau fractures: a finite element analysis.

BACKGROUND: This study investigated the biomechanical properties of a new plate used for the treatment of posterolateral tibial plateau fractures using finite element analysis. METHODS: The study groups were as follows: group PM, model of the new plate with posteromedial tibial plateau fracture; group PL, model of the new plate with posterolateral tibial plateau fracture; and group PC, model of the new plate with posterior tibial plateau fracture. We used two loading modes: uniform loading on the entire plateau, and loading on the posterior plateau. Data such as the displacement of the fracture and distribution of stress on the new plate and screws were recorded and analyzed. RESULTS: When the whole plateau was loaded, the displacement of fractures in groups PM, PL, and PC were 0.273, 0.114, and 0.265 mm, respectively. The maximum stresses on the plates in groups PM, PL, and PC were 118.131 MPa, 44.191 MPa, and 115.433 MPa. The maximum stresses on the screws in Groups PM, PL, and PC were 166.731, 80.330, and 164.439 MPa, respectively. When the posterior tibial plateau was loaded, the displacement of the fractures in groups PM, PL, and PC was 0.410, 0.213, and 0.390 mm, respectively. The maximum stresses on the plates in groups PM, PL, and PC were 194.012 MPa, 72.806 MPa, and 185.535 MPa. The maximum stresses on the screws in Groups PM, PL, and PC were 278.265, 114.839, and 266.396 MPa, respectively. CONCLUSION: The results of this study revealed that titanium plates have good fixation effects in all groups; therefore, the use of the new plate for posterolateral tibial plateau fractures appears to be safe and valid.

Analysis of Distribution of Intracranial and Extracranial Atherosclerotic Lesions and Risk Factors for Recurrence in First-Ever and Recurrent Ischemic Stroke Patients in Northeast China.

Objective: The purpose of this study is to analyze the distribution characteristics of atherosclerotic lesions and the risk factors of recurrence in patients with ischemic stroke. Methods: A total of 505 patients diagnosed with ischemic stroke from October 2016 to October 2022 were included. Divide 505 patients with ischemic stroke into old stroke group and new stroke group. Patients without old cerebral infarction were included in the first ischemic stroke group (first group), while patients with old cerebral infarction were included in the recurrent ischemic stroke group (recurrence group).Carotid artery color Doppler ultrasonography and transcranial Doppler ultrasonography were performed on all patients. Results: We compared the distribution and risk factors of atherosclerotic lesions between the first and recurrent groups (378 cases) (127 cases). Mild, moderate, and severe stenosis of the middle cerebral artery (MCA) and occlusion of the intracranial vertebral artery (VA) were the most common in both groups. Intracranial artery stenosis is significantly higher than extracranial artery stenosis, and the anterior circulation artery is more affected than the posterior circulation artery. In the initial and recurrent groups, the proportion of patients with intracranial artery stenosis was significantly higher than that of patients with extracranial artery stenosis (43.4% vs. 22.5% and 53.4% vs. 22.5%), and the number of patients with anterior circulation stenosis was higher than that of other groups. Compared with the first group, the recurrence group had a higher incidence of hypertension, dyslipidemia, and insufficient physical exercise. There is a significant difference in the levels of triglycerides (TG) and platelets (PLT) between the two groups in biochemical indicators. In the first group, infarction was most common in 284 cases (75.1%) of the frontal lobe, followed by 232 cases (61.4%) of the basal ganglia, and 147 cases (38.9%) of the parietal lobe. In the recurrence group, the proportion of frontal lobe infarction [284 (74.0%)], basal ganglia infarction [232 (70.1%)], and parietal lobe infarction [147 (37.0%)] was the highest. It can be observed that the recurrence group had a higher incidence of basal ganglia infarction (70.1% vs. 61.4%), but a lower incidence of occipital lobe infarction (0.8% vs. 4.2%). Conclusions: Our study found no significant difference in the distribution of intracranial and extracranial atherosclerotic lesions between first-ever and recurrent ischemic stroke patients in China. Notably, hypertension, years of dyslipidemia, insufficient physical exercise, elevated triglyceride (TG) levels, and increased platelet (PLT) counts were identified as significant risk factors for stroke recurrence. These findings may have implications for the management and prevention of recurrent ischemic strokes in clinical practice.

Interbrain substrates of role switching during mother-child interaction.

Mother-child interaction is highly dynamic and reciprocal. Switching roles in these back-and-forth interactions serves as a crucial feature of reciprocal behaviors while the underlying neural entrainment is still not well-studied. Here, we designed a role-controlled cooperative task with dual EEG recording to explore how differently two brains interact when mothers and children hold different roles. When children were actors and mothers were observers, mother-child interbrain synchrony emerged primarily within the theta oscillations and the frontal lobe, which highly correlated with children's attachment to their mothers (self-reported by mothers). When their roles were reversed, this synchrony was shifted to the alpha oscillations and the central area and associated with mothers' perception of their relationship with their children. The results suggested an observer-actor neural alignment within the actor's oscillations, which was related to the actor-toward-observer emotional bonding. Our findings contribute to the understanding of how interbrain synchrony is established and dynamically changed during mother-child reciprocal interaction.

Factors associated with the persistence of human papillomavirus after surgery in patients with cervical cancer.

OBJECTIVE: To determine the rate of human papillomavirus (HPV) persistence after surgery in patients with cervical cancer, and to analyze the factors associated with HPV persistence and viral load after surgery. METHODS: Medical records of women who underwent surgery for treatment of cervical cancer between 1 January 2018 and 30 June 2019 at Obstetrics and Gynecology Hospital of Fudan University in Shanghai, China, were retrospectively analyzed. Patients with persistent HPV infection after 2 years of follow-up were identified. Univariate and multivariate analyses were employed to determine the impact of various factors including patient age, menopausal status, parity, and surgical margin status on HPV persistence. The Wilcoxon test was used to analyze the factors that influenced postoperative HPV viral load. RESULTS: Altogether, 607 women were eligible for the final analysis. The persistence rates of HPV at 6 months, 1 year, and 2 years after surgery were 17.3, 13.7, and 10.2 %, respectively. In univariate analysis, the factors that were predictive of the persistence of HPV infection were old age, postmenopausal status, and positive vaginal incision margin with cancer. In multivariate analysis, the significant independent predictive factors were postmenopausal status and positive vaginal incision margin with cancer (P < 0.05, odds ratio (OR) = 2.289, 95 % confidence interval (CI): 1.262-4.150 and OR = 3.271, 95 % CI: 1.253-8.537, respectively). A vaginal lesion with cancer or squamous intraepithelial lesion (SIL) and positive vaginal incision margin influenced HPV viral load at 6 months after surgery (P < 0.05). CONCLUSIONS: Postmenopausal patients and those with positive vaginal incision margin with cancer are at an increased risk of HPV persistence after surgical treatment for cervical cancer. Vaginal lesions with cancer or SILs and positive vaginal incision margin are risk factors for high HPV viral load after surgery.

Biomechanical Evaluation of 2 Endoscopic Spine Surgery Methods for Treating Lumbar Disc Herniation: A Finite Element Study.

OBJECTIVE: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. METHODS: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. RESULTS: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4-5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. CONCLUSION: In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Inhaled nanoparticles for treating idiopathic pulmonary fibrosis by inhibiting honeycomb cyst and alveoli interstitium remodeling.

Idiopathic pulmonary fibrosis (IPF) is a progressive lung disease with high mortality. The Food and Drug Administration-approved drugs, nintedanib and pirfenidone, could delay progressive fibrosis by inhibiting the overactivation of fibroblast, however, there was no significant improvement in patient survival due to low levels of drug accumulation and remodeling of honeycomb cyst and interstitium surrounding the alveoli. Herein, we constructed a dual drug (verteporfin and pirfenidone)-loaded nanoparticle (Lip@VP) with the function of inhibiting airway epithelium fluidization and fibroblast overactivation to prevent honeycomb cyst and interstitium remodeling. Specifically, Lip@VP extensively accumulated in lung tissues via atomized inhalation. Released verteporfin inhibited the fluidization of airway epithelium and the formation of honeycomb cyst, and pirfenidone inhibited fibroblast overactivation and reduced cytokine secretion that promoted the fluidization of airway epithelium. Our results indicated that Lip@VP successfully rescued lung function through inhibiting honeycomb cyst and interstitium remodeling. This study provided a promising strategy to improve the therapeutic efficacy for IPF.

Traumatic bilateral acetabular fracture secondary to high-energy trauma in healthy adults.

BACKGROUND: Bilateral acetabular fracture is a very rare presentation among the trauma patients, as the pattern and the degree of the forces required to fracture both acetabula is very unique. The primary purpose of this study is to report a series of adult patients presenting with post-traumatic bilateral acetabular fracture without any history of pathological or metabolic bone disease. PATIENTS AND METHODS: In this retrospective study, 18 cases of traumatic bilateral acetabular fracture were included. There was predominance of both column (four patients on left and six on right) followed by anterior column (two patients left and four on right) and posterior wall (three patients left and right). They were treated surgically through open reduction and internal fixation. All cases were followed up for at least 13 months. Matta's criteria were used for radiological evaluation on plain radiographs. Functional outcome was evaluated using the Merle d'Aubigne and postel score at final follow-up. RESULTS: No patients were lost during the follow-up period; there was one case of surgical site infection. There were three cases of postoperative osteoarthritis, one case of heterotrophic ossification, one case of persistent sciatic nerve palsy and one case of lateral femoral cutaneous nerve palsy. The radiological evaluation according to Matta's criteria revealed anatomic reduction in 12 patients, imperfect reduction in three patients while other three patients had poor reduction. According to modified Merle d'Aubigne and Postel score, 10 cases were rated as excellent, five cases as good and three cases presented fair (one case) to poor (two cases) results. CONCLUSION: We report an unusual case series of bilateral acetabular fracture successfully managed surgically with good clinical outcome. With the increasing incidence of route traffic accidents, such cases would probably be recurrent in the upcoming years.

Giant tunnelling electroresistance in atomic-scale ferroelectric tunnel junctions.

Ferroelectric tunnel junctions are promising towards high-reliability and low-power non-volatile memories and computing devices. Yet it is challenging to maintain a high tunnelling electroresistance when the ferroelectric layer is thinned down towards atomic scale because of the ferroelectric structural instability and large depolarization field. Here we report ferroelectric tunnel junctions based on samarium-substituted layered bismuth oxide, which can maintain tunnelling electroresistance of 7 × 105 with the samarium-substituted bismuth oxide film down to one nanometer, three orders of magnitude higher than previous reports with such thickness, owing to efficient barrier modulation by the large ferroelectric polarization. These ferroelectric tunnel junctions demonstrate up to 32 resistance states without any write-verify technique, high endurance (over 5 × 109), high linearity of conductance modulation, and long retention time (10 years). Furthermore, tunnelling electroresistance over 109 is achieved in ferroelectric tunnel junctions with 4.6-nanometer samarium-substituted bismuth oxide layer, which is higher than commercial flash memories. The results show high potential towards multi-level and reliable non-volatile memories.

Hollow cubic ternary PdCuB nanocage electrocatalysts with greatly enhanced catalytic performance for formic acid oxidation.

The prepared PdCuB Ngs/C catalysts exhibited outstanding catalytic activity and stability in the formic acid oxidation reaction (FAOR). The improvement in electrocatalytic performance is due to the introduction of Cu and B atoms and the hollow nanocage structure, which changes the electronic structures of Pd, increases the reactive sites, and accelerates the reaction mass transfer rates.

The direct transfer approach for transcellular drug delivery.

A promising paradigm for drug administration that has garnered increasing attention in recent years is the direct transfer (DT) of nanoparticles for transcellular drug delivery. DT requires direct cell-cell contact and facilitates unidirectional and bidirectional matter exchange between neighboring cells. Consequently, DT enables fast and deep penetration of drugs into the targeted tissues. This comprehensive review discusses the direct transfer concept, which can be delineated into the following three distinct modalities: membrane contact-direct transfer, gap junction-mediated direct transfer (GJ-DT), and tunneling nanotubes-mediated direct transfer (TNTs-DT). Further, the intercellular structures for each modality of direct transfer and their respective merits and demerits are summarized. The review also discusses the recent progress on the drugs or drug delivery systems that could activate DT.

Record high room temperature resistance switching in ferroelectric-gated Mott transistors unlocked by interfacial charge engineering.

The superior size and power scaling potential of ferroelectric-gated Mott transistors makes them promising building blocks for developing energy-efficient memory and logic applications in the post-Moore's Law era. The close to metallic carrier density in the Mott channel, however, imposes the bottleneck for achieving substantial field effect modulation via a solid-state gate. Previous studies have focused on optimizing the thickness, charge mobility, and carrier density of single-layer correlated channels, which have only led to moderate resistance switching at room temperature. Here, we report a record high nonvolatile resistance switching ratio of 38,440% at 300 K in a prototype Mott transistor consisting of a ferroelectric PbZr0.2Ti0.8O3 gate and an RNiO3 (R: rare earth)/La0.67Sr0.33MnO3 composite channel. The ultrathin La0.67Sr0.33MnO3 buffer layer not only tailors the carrier density profile in RNiO3 through interfacial charge transfer, as corroborated by first-principles calculations, but also provides an extended screening layer that reduces the depolarization effect in the ferroelectric gate. Our study points to an effective material strategy for the functional design of complex oxide heterointerfaces that harnesses the competing roles of charge in field effect screening and ferroelectric depolarization effects.

[High-value utilization technology and approach of Chinese medicinal residues under background of "Dual Carbon"].

In recent years, the traditional Chinese medicine(TCM)industry has experienced rapid development, resulting in a significant amount of Chinese medicinal residues generated during the industrial manufacturing process. Currently, the main methods of handling Chinese medicinal residues include stacking, landfilling, and incineration, which lead to substantial resource waste and potential environmental pollution. With "carbon peak" and "carbon neutrality"( "Dual Carbon")becoming national strategic goals, the TCM industry is ushering in a new wave of "low-carbon" trends, and the high-value utilization of Chinese medicinal residues has become a breakthrough for implementing a low-carbon economy in the TCM sector. From the perspective of a low-carbon economy, this article reviewed literature in China and abroad to summarize the microbial transformation technology, enzymatic conversion technology, biomass pyrolysis, gasification, hydrothermal liquefaction, and other high-value utilization technologies for Chinese medicinal residues. It also overviewed the applications of Chinese medicinal residue in feed additives, organic fertilizers, edible mushroom cultivation substrates, preparation of activated carbon for wastewater treatment, and new energy batteries. Considering the current status of resource utilization of Chinese medicinal residues, feasible strategies and suggestions for resource development and utilization were proposed to improve the quality and efficiency of the Chinese medicinal resource industry chain and promote green development, thereby providing research ideas and theoretical basis for achieving carbon peak and carbon neutrality goals.

Vitamin E stabilizes iron and mitochondrial metabolism in pulmonary fibrosis.

Introduction: Pulmonary fibrosis (PF) is a fatal chronic lung disease that causes structural damage and decreased lung function and has a poor prognosis. Currently, there is no medicine that can truly cure PF. Vitamin E (VE) is a group of natural antioxidants with anticancer and antimutagenic properties. There have been a few reports about the attenuation of PF by VE in experimental animals, but the molecular mechanisms are not fully understood. Methods: Bleomycin-induced PF (BLM-PF) mouse model, and cultured mouse primary lung fibroblasts and MLE 12 cells were utilized. Pathological examination of lung sections, immunoblotting, immunofluorescent staining, and real-time PCR were conducted in this study. Results: We confirmed that VE significantly delayed the progression of BLM-PF and increased the survival rates of experimental mice with PF. VE suppressed the pathological activation and fibrotic differentiation of lung fibroblasts and epithelial-mesenchymal transition and alleviated the inflammatory response in BLM-induced fibrotic lungs and pulmonary epithelial cells in vitro. Importantly, VE reduced BLM-induced ferritin expression in fibrotic lungs, whereas VE did not exhibit iron chelation properties in fibroblasts or epithelial cells in vitro. Furthermore, VE protected against mitochondrial dysmorphology and normalized mitochondrial protein expression in BLM-PF lungs. Consistently, VE suppressed apoptosis in BLM-PF lungs and pulmonary epithelial cells in vitro. Discussion: Collectively, VE markedly inhibited BLM-induced PF through a complex mechanism, including improving iron metabolism and mitochondrial structure and function, mitigating inflammation, and decreasing the fibrotic functions of fibroblasts and epithelial cells. Therefore, VE presents a highly potential therapeutic against PF due to its multiple protective effects with few side effects.

Momordica anti-HIV protein MAP30 abrogates the Epstein-Barr virus nuclear antigen 1 dependent functions in host cells.

Originally extracted from Momordica charantia seeds, the antiviral and anti-tumor activities of Momordica anti-HIV protein MAP30 have become well known. Although MAP30 has been reported to possess antiviral activity against several human viruses, the current understanding of the MAP30-mediated antiviral response is mainly derived from the previous research work on anti-HIV herbal medicines; the mechanistic insight of its effects on other viruses remains largely unknown. In this study, we showed that both ectopically expressed and purified recombinant MAP30 (rMAP30) impeded Epstein-Barr virus Nuclear Antigen 1 (EBNA1)-mediated transcription from the viral latent replication origin. Mechanistically, in vivo and in vitro studies revealed that MAP30 caused EBNA1 to dissociate from the cognate binding sites, which disrupted downstream EBNA1-dependent viral epigenome accumulation and cell maintenance of Epstein-Barr virus (EBV)-associated neoplastic cells. Finally, mutational analysis indicated that the N-terminal ricin A homologous domain shared by ricin-like proteins was implicated in the anti-EBV response. Our study provides evidence to support that MAP30 has a unique property to combat EBV latent infection, suggesting a potential to develop this herbal protein to be an alternative medicine for EBV associated diseases.

The regulatory role of MdNAC14-Like in anthocyanin synthesis and proanthocyanidin accumulation in red-fleshed apples.

Flavonoids, such as anthocyanins and proanthocyanidins (PAs), play essential roles in plant growth, development, and stress response. Red-fleshed apples represent a valuable germplasm resource with high flavonoid content. Understanding and enriching the regulatory network controlling flavonoid synthesis in red-fleshed apples holds significant importance for cultivating high-quality fruits. In this study, we successfully isolated an NAC transcription factor, MdNAC14-Like, which exhibited a significant negative correlation with the content of anthocyanin. Transient injection of apple fruit and stable expression of callus confirmed that MdNAC14-Like acts as an inhibitor of anthocyanin synthesis. Through yeast monohybrid, electrophoretic mobility shift, and luciferase reporter assays, we demonstrated the ability of MdNAC14-Like to bind to the promoters of MdMYB9, MdMYB10, and MdUFGT, thus inhibiting their transcriptional activity and subsequently suppressing anthocyanin synthesis. Furthermore, our investigation revealed that MdNAC14-Like interacts with MdMYB12, enhancing the transcriptional activation of MdMYB12 on the downstream structural gene MdLAR, thereby promoting PA synthesis. This comprehensive functional characterization of MdNAC14-Like provides valuable insights into the intricate regulatory network governing anthocyanin and PA synthesis in apple.

Synthesis of novel naphthalene-chimonanthine scaffolds hybrids with potent antibacterial or antifungal activity.

In this work, a total of 19 novel naphthalene hybrids with chimonanthine scaffolds were efficiently synthesised from indole-3-acetonitrile in good yields. The prepared compounds were evaluated for biological activity against Cryptococcus neoformans, Escherichia coli, Shigella spp, Candida albicans, Salmonella spp, and Staphylococcus aureus. The preliminary bioassays showed that most of the synthesised compounds exhibited significant antibacterial or antifungal activity. Notably, compound 8 showed potent activity against Cryptococcus neofonmans, Escherichia coli, Shigella spp, and Candida albicans than the positive control, all with the same MIC value of 3.53 µM. Compound 8 had a broad spectrum of antibacterial or antifungal activity, and will be studied further.

Sn-doped PdCu alloy nanosheet assemblies as an efficient electrocatalyst for formic acid oxidation.

A ternary alloy catalyst has been confirmed to be an effective catalyst for anode catalysis in direct formic acid fuel cells, which can improve the electrocatalytic performance of the fuel cell by introducing commonly used metal elements to change the Pd electronic structure and can reduce the use of precious metals and the cost of catalyst production. In this study, PdCuSn Ns/C with a special 3D structure was synthesized by a simple two-step wet chemical method. The PdCuSn Ns/C catalyst prepared exhibits excellent catalytic activity and stability for the formic acid oxidation reaction (FAOR). The mass activity of 2420.1 mA mg-1Pd is 3.94 times that of the Pd/C catalyst. The improvement in the electrocatalytic performance stems from the introduction of Cu and Sn atoms and the unique 3D nanosheet structure, which changes the electronic structure of Pd to increase the reactive active site and accelerates the reaction mass transfer rate, and also reduces the content of precious metals, while improving the electrocatalytic performance. Therefore, the PdCuSn Ns/C catalyst has a promising future in the field of electrocatalysis.